TI-73 question: How to dump a 1.40 ROM from calc t
Posted at Wednesday, November 26th, 2008 8:05PM by TI73

Hi, I am wondering how to I do a ROM Dump from my TI-73 to the PC? I have TiLP but to do a ROM dump with it it sends an assembly program to my calculator and it must be run with Mallard. But Mallard only runs on OS 1.60 or higher and I got OS 1.40 so I get ERR:INVALID DIM error when running it. Rom8x has no TI-73 support and in TI-Connect and TI-Graph Link I couldn't find any option to backup the OS from the calculator. Any ideas?


re:TI-73 question: How to dump a 1.40 ROM from cal
Posted at Wednesday, November 26th, 2008 9:22PM by jbr

Why can't you just upgrade to OS 1.60?


re:TI-73 question: How to dump a 1.40 ROM from cal
Posted at Wednesday, November 26th, 2008 9:47PM by TI73

Because I wanted to keep all old versions of the OSes I got. I alerady got all the 83+ ones except the ones before 1.12.


re:TI-73 question: How to dump a 1.40 ROM from cal
Posted at Tuesday, December 2nd, 2008 1:30AM by TI73

Ok thanks for the link, but I finally solved my problem. I didn't noticed there was actually a version 0.3 of Mallard, which ran OSes under 1.60 so I managed to dump it fine on my computer. I tested it in PindurTI and WabbitEmu and the OS worked pretty well (altough in WabbitEmu first version it showed the TI-83+ keyboard and in the 2nd version of WabbitEmu I had to restart the emu everytime I wanted to switch from a 83+ to 73 OS or vice-versa.


reply

You must be logged in to post replies.